Daily inspection and maintenance methods for water park equipment
Daily inspection and maintenance methods for water park equipment Maintenance can effectively improve the operating efficiency of the equipment, reduce equipment loss, prolong the life of the equipment, and ensure the safe operation of the equipment, thus ensuring the safety of tourists. Therefore, daily inspections of water park equipment and maintenance during the park closure are essential! Water slides are common types of water amusement facilities. Visitors enter from entrance, sit or lie, and the body has close contact with the surface of the slide. The break or protrusion of the surface of slide is seriously harmful to the body of the tourists. Therefore, the slides should be properly inspected and maintained frequently, which can ensure the safety of tourists and prolong the service life of the slides. Inspection and maintenance work is generally carried out on the waterway of the slide, the support frame (column and steel frame), and electrical equipment etc. 1. The inspection and maintenance of slide 1.1 For relatively smooth slides which people can walk on the waterway, check each slide for the following points before using the equipment every day. (I) Obstacle on the slide! (2) Cracks, debris, and blistering on the surface of the slide. (3) Whether the joint is rough or broken. (4) Is the seal at the joint cracked? (5) Is there any deformation at the turn? (6) Whether there is any abnormal shaking problem when walking on the waterway? (7) Whether the interface is loose? For high-risk and high-speed slides, people cannot walk on the waterway to check. This type of daily inspection is as follows: (I) Observing the stains and breakage points on the surface from a distance. (2) Perform a test slip by the test slipper to observe whether there is abnormally shaken about the part or the entire structure! (3) Let the test personnel record the place where the surface of the slide way is rough and relevant problems. 1.2 Slide maintenance Cleaning: When there is stain on the surface of the slide, use a soft bristle brush and a neutral detergent to clean the dust, grease and sunscreen on the slide. For stains that cannot be cleaned, they can be repaired with varnish or lacquer wax after polish. Waxing: Fiberglass need to be waxed by high-quality waxes at least twice a year. In general, before waxing, the black spots and faded places should be polished to its original gloss by a good-quality brightener. Waxing can prevent fading caused by long-term exposure to ultraviolet light. The more often the surface is waxed, the longer it lasts. It is important to note that we need to be very careful when using tools such as polishing, do not to overheat the surface. Polishing overheating can cause sand-like particles on the surface of the slide, causing blisters and streaks. This requires repainting. Repair: Normal use can also cause debris and cracks on the fiberglass slide. Repair must be done with a qualified glass glue. Daxin Water Park equipment reminds you of debris and cracks inside the gel coat, or the scratch depth is greater than the thickness of the gel coat, but the fiberglass surface is not completely broken. Follow the steps below to repair: Prepare tools to needed: (l) sandpaper, 36-100 mesh, 220-320 mesh (mixed dry), 600 mesh (mild dry), (2) sanding tool (3) acetone (4) masking tape (5) knife (6) Putty knife (7) Mixed wood board (8) Glass fiber resin hardener (9) Gel coat oil $ (10) Oil shaving (11) Slurry polisher (12) High quality wax. Repair steps: (I) For rough places, we can use 36-100 mesh sandpaper to polish the rough edges. (2) Wash with acetone, and let it dry. (3) Use two masking tapes for the area to be covered. (4) Apply the repair mixture to the repaired area with a putty knife. Note: These places must be dry and clean, free of dirt such as dust and sand. (5) Keep the repaired area dry and 20 minutes to 1 hour needed to harden. (6) After the repaired area is hardened, polish the area and the surrounding area with 100 mesh sandpaper. Note: Sanding may move and cover masking tape. Paste it before painting. (7) Apply a gel coat with a brush. Hardening takes 20-60 minutes. Note: Oil brushes and other Tools must be cleaned with acetone. (8) After the gel coat is dried, the tape is peeled off, polished with a polishing tool and 220-320 mesh wet sandpaper, and then polished with a 600 mesh sandpaper. (9) Wash the painted surface with a polisher and water. (10) Waxing. Note: Repair tools include toxic, corrosive, and flammable items. China Travel Information Network reminds you that it can only be used under excellent ventilation conditions. Avoid inhaling these gases as they are harmful. If you get it to the eyes by mistake, rinse thoroughly with water for several minutes and look for a doctor. If contact with skin or clothing, wash immediately with acetone. Hairline cracks, sometimes called spider webs or star-shaped cracks, may appear on the surface of gel coats or glass products. Daxin Water Park reminds you that this is caused by the combined action of corrosion, impact and shaking. Although it affects the appearance, it does not affect the structural strength. Hairline cracks can be repaired with a 100-mesh sandpaper in the damaged area and then be re-coated with gel coat. The edge of the sink includes a thick, and hard gel coat. The pressure caused by normal use can also cause cracks in this place. These are not structural problems. To repair these edge cracks, you can use a 100 mesh sandpaper to re-coat a gel coat on the damaged area. 1.3 Inspection and maintenance of connection part. The slide connector plays a very important role in passenger comfort and fun. The connection part should be as flat as possible. It should be noted that the below connection
The 12th Zhongshan International Game and Amusement Fair
On October 11-13, 2019, the 12th Zhongshan International Game and Amusement Fair will be held in Guangdong Zhongshan Expo Center as scheduled, with an exhibition area of 32,000 square meters, including an outdoor area of 16,000 square meters and outdoor area of 16,000 square meters, it is expected that more than 400 domestic and overseas amusement and cultural and travel related brand enterprises will participate in the exhibition, focusing on the latest development achievements of China’s game entertainment and cultural tourism industry. Guangdong Daxin Water Park Equipment Co.,Ltd. was invited to participate in this exhibition. Exhibition details Daxin Water Park Booth No.:【T02】 Visit time: October 11-13, 2019 Venue: Boai 6th Road, Shijie East District, Zhongshan City, Guangdong Province (Zhongshan Expo Center)
2019GTI Guangzhou Exhibition, Daxin Water Park Exhibition
On September 10th, under the expectation of hundreds of game entertainment companies, the 11th GTI Asia China Expo (hereinafter referred to as “GTI Guangzhou Exhibition”) finally arrived as scheduled. It is reported that as the annual large-scale event of the Water Park industry, this year’s GTI Guangzhou exhibition has more than 600 exhibitors, which is the largest, most well-known and most professional industry event in China. Guangdong Daxin Water Park Group was invited to attend the exhibition. During the exhibition, Daxin attracted many new and old friends to visit the booth, multitudinous successful cases and excellent product quality won the praise of customers. On this occasion, I sincerely thanks all the new and old customers for their support and favor of Daxin Water Park! The first day of the exhibition, the scene was hot ▼ Many foreign customers come to consult ▼ Many customers and friends took a photo for record▼ Guangdong Daxin Water Park Intelligent Technology Co., Ltd. specializes in research and development of water slide equipment, intelligent wave pool, large-scale interactive water house, assembled swimming pool, children’s water equipment, drifting competition and other six series, complete sets of large water park Water Park facilities. We mainly provide new products development, plan and designing, manufacturing, engineering construction, and other professional customized and integrated services for domestic and overseas water Water Park customers. Although the exhibition has ended, the enthusiasm of Daxin Water Park has not faded! Thanks to the trust and support of our customers and friends, we will continue to innovate as always.
Outdoor Water Park Project
Aegaen Sea Water Park: Located in Hubei, China, the total area is about 42,000 square meters. Daxin offers water park design, water park equipment, installation services to our clients. Innovative R&D team develop new arrival water park equipment according to water park industry market and customer requirements. Professional planning &designing team make proposal for a new water park according to the land site and your requirements. Experienced products team make a whole plan to ensure the producing time and top quality equipment to all our clients.Raw material use top brand gel coal and resin Skilled engineering team is responsible for guiding installation for our client’s project. After sales service to all our clients.
Myanmar Water Park
Brief information Project name: Myanmar Water Park Size: 40000㎡Location: Myanmar Finished time: 2021.06.05
Daxin Group Invite you To Attend “Asia China Expo2019 ”
Let’s Meet and Communicate At Theme Park Vietnam EXPO 2019 in Ho Chi Minh City Vietnam! Date:21-22 ,August,2019 Addess: 202 Hoang Van Thu Street Ward 9, Tan Binh District, Ho Chi Minh City, Vietnam, Ho Chi Minh City, Viet Nam
How to save energy in the construction of a water park?
How to save energy in the construction of a water park? In order to achieve the effect of energy saving, we must first consider it from the beginning of planning. To illustrate this problem, we will start from the specific design. First, the combination of the lazy river and surf pool can save energy. Anyone who is engaged in professional design knows that there is at least two or three high-power axial flow pumps for a surf pool(flow rider), and the flow rate per unit is generally 1000m3/h. Taking three 55KW axial flow pump surf pool as an example, the flow rate of three axial flow pumps is 3000m3/h. If we take water from the lazy river, when the surf pool is running, collect the water together and then lead it to the lazy river through the river channel, which can completely promote a 400-meter-long lazy river. At present, most of the lazy rivers designed in China and abroad use pipeline pumps. A 400-meter river channel (3-4 meters wide) requires at least four 30KW pumps, with a total power of 120KW and a power consumption of 120 degrees per hour. Running for 10 hours, then the power consumption of one day is 1200 degrees. The total power per hour of surf pool is 165KW, which is 10 hours a day, which is 1650 kWh. Then the two devices in the lazy river and surf pool consume a total of 2,850 degrees a day. If we take this into account when planning our design, we can save 1200 kWh per day. Of course, in planning and design, it is also necessary to consider which part of the lazy river to take water, and which part of the water supply is also very important. I won’t go into details here, which is why our water park investors are looking for professional design companies. Second, the organic combination of the lazy river and the water dragon can also save energy. A 300-meter-long water dragon usually has a 4-5 ascending slope. Each high-altitude slope requires a large-flow high-lift pump. The power of the pump varies from 45KW, 55KW, 75KW, and 90KW. The size is based on the height of the climb. At the time of design, we can consider collecting the water discharged from the water dragon, and organically participate in the push flow through the circulation river introduced by the pipe network. It can also save tens of kilowatt hours per hour. The third is that almost all the slides use running water. The position of the pump house is also very important. The farther the pump house is from the water supply point, the greater the loss of the pipe head. In addition, if the pipe design of the same equipment room is unreasonable, the elbow is too much. The head loss is also very large. This is why different equipment manufacturers choose different pump powers. A large-scale (equal investment of about 30 million) water parks, different manufacturers, through design optimization and organic combination total power gap of around 300KW is a common thing. Therefore, when we choose equipment manufacturers, we should not only look at the price of equipment, but also the comprehensive technical capabilities and level of this company. This is energy saving from the perspective of planning and design, and now talk about energy saving from the perspective of equipment design. In order to illustrate the problem, it will also be briefly described in the specific equipment case. The first is the push flow of the lazy river. Is it more reasonable to use a pipeline pump (small flow, large lift) or an axial flow pump? Here is a case I have done. The lazy river of Tianshanhai World Phase I of Shijiazhuang is 3-4 meters wide and 200 meters long. The operation of the lazy river can be carried out with a 22KW axial flow pump. The flow rate of the river is close to 1 m/s. If a pipe pump is used to push the flow, to achieve a flow rate of 1 m / s, at least two 22 kW pipe pumps are required. This saves at least one pump. Second, with the advancement of technology, there are more and more kinds of slides, and people are getting higher and higher in order to pursue stimulation. We carry out individualized design according to different projects, which also puts higher requirements on various equipment manufacturers. When designing the slides, our technicians should make full use of the water discharged from the high-level slides to participate in the lubrication of the low-level slides, which can also achieve the purpose of energy saving. The third is to achieve energy saving by improving the process of tsunami wave making. The height of the tsunami pool is relatively high, and it is easy to make a high wave at the beginning of the tsunami. We can use the program to control the vacuum pump vacuum and the valve opening time, so that the wave can be gradually increased, and the energy saving can be achieved. In addition, the tsunami wave can be saved without using a vacuum pump instead of a pump. The above is how to save energy in the water park from two aspects. One is considered from the time of planning and design, and the second is from the time of equipment design. There are still many ways to save energy, such as how to make reasonable use of the difference between low peaks and peaks during the operation process, and reasonably turn on and turn off some equipment. Of course, any energy-saving method must be carried out to meet the needs of the guests.
Malaysia Water Park
Brief information Project name: Malaysia Water Park Size: 10000㎡Location: Malaysia Finished time: 2020.06.05
Theme Park Vietnam EXPO 2019 in Ho Chi Minh City Vietnam!
Let’s Meet and Communicate At Theme Park Vietnam EXPO 2019 in Ho Chi Minh City Vietnam! Date:21-22 ,August,2019 Addess: 202 Hoang Van Thu Street Ward 9, Tan Binh District, Ho Chi Minh City, Vietnam, Ho Chi Minh City, Viet Nam
The 2018 Asian Attractions Expo – Shanghai
About Asia Attractions Expo； The 2018 Asian Attractions Expo will be held at the Hong Kong Convention and Exhibition Center in Hong Kong, China from June 6th to 8th. The net exhibition area will be 9,500 square meters. The fair includes a wide range of industry education conferences, communication activities and visits to famous scenic spot. More than 8,000 tourist attractions industry professionals from more than 50 countries will participate in the 2018 Asian Attractions Expo. Address: Hong Kong Convention and Exhibition Center, China. Time: 2018.6 Month 6-8 Daxin Amusement Booth: 1436 The second day of exhibition, customers who come to exhibition are almost accurate customers, and the quality of the customers is relatively high. I wish Daxin water park a full return!